Report CIS - Plastic Tubes, Pipes and Hoses, and Fitting - Market Analysis, Forecast, Size, Trends and Insights for 499$
Report Update May 4, 2024

CIS - Plastic Tubes, Pipes and Hoses, and Fitting - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)
Subscription
Online access and download
from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

CIS: Market for Plastics Tubes, Pipes And Hoses, And Fitting 2024

Market Size for Plastics Tubes, Pipes And Hoses, And Fitting in CIS

In 2023, the CIS plastic pipe and hose market decreased by X% to $X for the first time since 2020, thus ending a two-year rising trend. The market value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The level of consumption peaked at $X in 2022, and then dropped modestly in the following year.

Production of Plastics Tubes, Pipes And Hoses, And Fitting in CIS

In value terms, plastic pipe and hose production amounted to $X in 2023 estimated in export price. Over the period under review, production, however, saw a relatively flat trend pattern. The pace of growth was the most pronounced in 2019 when the production volume increased by X%. Over the period under review, production hit record highs at $X in 2014; however, from 2015 to 2023, production failed to regain momentum.

Exports of Plastics Tubes, Pipes And Hoses, And Fitting

Exports in CIS

In 2023, exports of plastics tubes, pipes and hoses, and fitting in the CIS surged to X tons, growing by X% against the previous year's figure. Over the period under review, exports recorded a strong expansion. The pace of growth appeared the most rapid in 2017 with an increase of X% against the previous year. The volume of export peaked at X tons in 2021; however, from 2022 to 2023, the exports stood at a somewhat lower figure.

In value terms, plastic pipe and hose exports surged to $X in 2023. Total exports indicated a measured expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, exports decreased by X% against 2021 indices. The growth pace was the most rapid in 2017 when exports increased by X%. The level of export peaked at $X in 2021; however, from 2022 to 2023, the exports failed to regain momentum.

Exports by Country

Russia was the largest exporting country with an export of around X tons, which resulted at X% of total exports. Belarus (X tons) ranks second in terms of the total exports with a X% share, followed by Kazakhstan (X%). Uzbekistan (X tons), Azerbaijan (X tons), Kyrgyzstan (X tons) and Armenia (X tons) held a relatively small share of total exports.

From 2012 to 2023, average annual rates of growth with regard to plastic pipe and hose exports from Russia stood at X%. At the same time, Kyrgyzstan (X%), Azerbaijan (X%), Armenia (X%), Belarus (X%) and Kazakhstan (X%) displayed positive paces of growth. Moreover, Kyrgyzstan emerged as the fastest-growing exporter exported in the CIS, with a CAGR of X% from 2012-2023. By contrast, Uzbekistan (X%) illustrated a downward trend over the same period. Uzbekistan (X p.p.), Azerbaijan (X p.p.) and Kyrgyzstan (X p.p.) significantly strengthened its position in terms of the total exports, while Kazakhstan and Russia saw its share reduced by X% and X% from 2012 to 2023, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, Russia ($X) remains the largest plastic pipe and hose supplier in the CIS, comprising X% of total exports. The second position in the ranking was held by Belarus ($X), with a X% share of total exports. It was followed by Armenia, with a X% share.

From 2012 to 2023, the average annual growth rate of value in Russia totaled X%. The remaining exporting countries recorded the following average annual rates of exports growth: Belarus (X% per year) and Armenia (X% per year).

Export Prices by Country

In 2023, the export price in the CIS amounted to $X per ton, which is down by X% against the previous year. In general, the export price showed a mild downturn. The growth pace was the most rapid in 2021 an increase of X%. Over the period under review, the export prices reached the maximum at $X per ton in 2013; however, from 2014 to 2023, the export prices remained at a lower figure.

There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Armenia ($X per ton), while Kyrgyzstan ($X per ton) was amongst the lowest.

From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Armenia (X%), while the other leaders experienced more modest paces of growth.

Imports of Plastics Tubes, Pipes And Hoses, And Fitting

Imports in CIS

Plastic pipe and hose imports skyrocketed to X tons in 2023, picking up by X% compared with 2022 figures. Overall, imports, however, saw a relatively flat trend pattern. Over the period under review, imports reached the peak figure at X tons in 2014; however, from 2015 to 2023, imports remained at a lower figure.

In value terms, plastic pipe and hose imports skyrocketed to $X in 2023. In general, imports, however, recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 with an increase of X%. The level of import peaked at $X in 2014; however, from 2015 to 2023, imports stood at a somewhat lower figure.

Imports by Country

In 2023, Russia (X tons) represented the largest importer of plastics tubes, pipes and hoses, and fitting, making up X% of total imports. Uzbekistan (X tons) took the second position in the ranking, followed by Kazakhstan (X tons), Belarus (X tons) and Moldova (X tons). All these countries together took near X% share of total imports. The following importers - Azerbaijan (X tons) and Armenia (X tons) - each resulted at a X% share of total imports.

From 2012 to 2023, average annual rates of growth with regard to plastic pipe and hose imports into Russia stood at X%. At the same time, Uzbekistan (X%), Armenia (X%) and Moldova (X%) displayed positive paces of growth. Moreover, Uzbekistan emerged as the fastest-growing importer imported in the CIS, with a CAGR of X% from 2012-2023. Belarus experienced a relatively flat trend pattern. By contrast, Kazakhstan (X%) and Azerbaijan (X%) illustrated a downward trend over the same period. Uzbekistan (X p.p.) and Armenia (X p.p.) significantly strengthened its position in terms of the total imports, while Azerbaijan and Russia saw its share reduced by X% and X% from 2012 to 2023, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, Russia ($X) constitutes the largest market for imported plastics tubes, pipes and hoses, and fitting in the CIS, comprising X% of total imports. The second position in the ranking was taken by Kazakhstan ($X), with an X% share of total imports. It was followed by Belarus, with a X% share.

In Russia, plastic pipe and hose imports declined by an average annual rate of X% over the period from 2012-2023. In the other countries, the average annual rates were as follows: Kazakhstan (X% per year) and Belarus (X% per year).

Import Prices by Country

The import price in the CIS stood at $X per ton in 2023, which is down by X% against the previous year. Over the period under review, the import price, however, saw a relatively flat trend pattern. The pace of growth was the most pronounced in 2021 when the import price increased by X% against the previous year. Over the period under review, import prices attained the peak figure at $X per ton in 2022, and then dropped in the following year.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Russia ($X per ton), while Uzbekistan ($X per ton) was amongst the lowest.

From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Moldova (X%), while the other leaders experienced more modest paces of growth.

Source: IndexBox Platform

This report provides an in-depth analysis of the market for plastic pipe and hose in CIS. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

  • Prodcom 22212153 - Rigid tubes, pipes and hoses of polymers of ethylene
  • Prodcom 22212155 - Rigid tubes, pipes and hoses of polymers of propylene
  • Prodcom 22212157 - Rigid tubes, pipes and hoses of polymers of vinyl chloride
  • Prodcom 22212170 - Rigid tubes, pipes and hoses of plastics (excluding of polymers of ethylene, of polymers of propylene, of polymers of vinyl chloride)
  • Prodcom 22212920 - Flexible tubes, pipes and hoses of plastics, with a burst pressure . .27,6 MPa
  • Prodcom 22212935 - Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, without fittings
  • Prodcom 22212937 - Flexible tubes, pipes and hoses of plastics, not reinforced or otherwise combined with other materials, with fittings, seals or connectors
  • Prodcom 22212950 - Plastic tubes, pipes and hoses (excluding artificial guts, s ausage skins, rigid, flexible tubes and pipes having a minimum burst pressure of .27,6 MPa)
  • Prodcom 22212970 - Fittings, e.g. joints, elbows, flanges, of plastics, for tubes, p ipes and hoses

Country coverage:

Data coverage:

  • Market volume and value
  • Per Capita consumption
  • Forecast of the market dynamics in the medium term
  • Production in CIS, split by region and country
  • Trade (exports and imports) in CIS
  • Export and import prices
  • Market trends, drivers and restraints
  • Key market players and their profiles

Reasons to buy this report:

  • Take advantage of the latest data
  • Find deeper insights into current market developments
  • Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

  1. How to diversify your business and benefit from new market opportunities
  2. How to load your idle production capacity
  3. How to boost your sales on overseas markets
  4. How to increase your profit margins
  5. How to make your supply chain more sustainable
  6. How to reduce your production and supply chain costs
  7. How to outsource production to other countries
  8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

  1. 1. INTRODUCTION

    Making Data-Driven Decisions to Grow Your Business

    1. REPORT DESCRIPTION
    2. RESEARCH METHODOLOGY AND AI PLATFORM
    3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
    4. GLOSSARY AND SPECIFIC TERMS
  2. 2. EXECUTIVE SUMMARY

    A Quick Overview of Market Performance

    1. KEY FINDINGS
    2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
  3. 3. MARKET OVERVIEW

    Understanding the Current State of The Market and Its Prospects

    1. MARKET SIZE
    2. CONSUMPTION BY COUNTRY
    3. MARKET FORECAST TO 2030
  4. 4. MOST PROMISING PRODUCT

    Finding New Products to Diversify Your Business

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
    2. BEST-SELLING PRODUCTS
    3. MOST CONSUMED PRODUCT
    4. MOST TRADED PRODUCT
    5. MOST PROFITABLE PRODUCT FOR EXPORT
  5. 5. MOST PROMISING SUPPLYING COUNTRIES

    Choosing the Best Countries to Establish Your Sustainable Supply Chain

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
    2. TOP PRODUCING COUNTRIES
    3. TOP EXPORTING COUNTRIES
    4. LOW-COST EXPORTING COUNTRIES
  6. 6. MOST PROMISING OVERSEAS MARKETS

    Choosing the Best Countries to Boost Your Exports

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
    2. TOP CONSUMING MARKETS
    3. UNSATURATED MARKETS
    4. TOP IMPORTING MARKETS
    5. MOST PROFITABLE MARKETS
  7. 7. PRODUCTION

    The Latest Trends and Insights into The Industry

    1. PRODUCTION VOLUME AND VALUE
    2. PRODUCTION BY COUNTRY
  8. 8. IMPORTS

    The Largest Importers on The Market and How They Succeed

    1. IMPORTS FROM 2012–2023
    2. IMPORTS BY COUNTRY
    3. IMPORT PRICES BY COUNTRY
  9. 9. EXPORTS

    The Largest Exporters on The Market and How They Succeed

    1. EXPORTS FROM 2012–2023
    2. EXPORTS BY COUNTRY
    3. EXPORT PRICES BY COUNTRY
  10. 10. PROFILES OF MAJOR PRODUCERS

    The Largest Producers on The Market and Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
  11. 11. COUNTRY PROFILES

    The Largest Markets And Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
    • Armenia
    • Azerbaijan
    • Belarus
    • Kazakhstan
    • Kyrgyzstan
    • Moldova
    • Russia
    • Tajikistan
    • Uzbekistan
  12. LIST OF TABLES

    1. Key Findings In 2023
    2. Market Volume, In Physical Terms, 2012–2023
    3. Market Value, 2012–2023
    4. Per Capita Consumption, By Country, 2018–2023
    5. Production, In Physical Terms, By Country, 2012–2023
    6. Imports, In Physical Terms, By Country, 2012–2023
    7. Imports, In Value Terms, By Country, 2012–2023
    8. Import Prices, By Country Of Destination, 2012–2023
    9. Exports, In Physical Terms, By Country, 2012–2023
    10. Exports, In Value Terms, By Country, 2012–2023
    11. Export Prices, By Country Of Origin, 2012–2023
  13. LIST OF FIGURES

    1. Market Volume, In Physical Terms, 2012–2023
    2. Market Value, 2012–2023
    3. Consumption, By Country, 2023
    4. Market Volume Forecast to 2030
    5. Market Value Forecast to 2030
    6. Products: Market Size And Growth, By Type
    7. Products: Average Per Capita Consumption, By Type
    8. Products: Exports And Growth, By Type
    9. Products: Export Prices And Growth, By Type
    10. Production Volume And Growth
    11. Exports And Growth
    12. Export Prices And Growth
    13. Market Size And Growth
    14. Per Capita Consumption
    15. Imports And Growth
    16. Import Prices
    17. Production, In Physical Terms, 2012–2023
    18. Production, In Value Terms, 2012–2023
    19. Production, By Country, 2023
    20. Production, In Physical Terms, By Country, 2012–2023
    21. Imports, In Physical Terms, 2012–2023
    22. Imports, In Value Terms, 2012–2023
    23. Imports, In Physical Terms, By Country, 2023
    24. Imports, In Physical Terms, By Country, 2012–2023
    25. Imports, In Value Terms, By Country, 2012–2023
    26. Import Prices, By Country, 2012–2023
    27. Exports, In Physical Terms, 2012–2023
    28. Exports, In Value Terms, 2012–2023
    29. Exports, In Physical Terms, By Country, 2023
    30. Exports, In Physical Terms, By Country, 2012–2023
    31. Exports, In Value Terms, By Country, 2012–2023
    32. Export Prices, 2012–2023

Recommended reports

Free Data: Plastic Tubes, Pipes And Hoses, And Fitting - CIS