Croatia - Grinding and Sharpening Metal Finishing Machines - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCroatia: Market for Grinding And Sharpening Metal Finishing Machines 2024
Market Size for Grinding And Sharpening Metal Finishing Machines in Croatia
In 2022, the Croatian grinding and sharpening machine market was finally on the rise to reach $X after two years of decline. Overall, consumption showed a resilient increase. Grinding and sharpening machine consumption peaked at $X in 2019; however, from 2020 to 2022, consumption failed to regain momentum.
Production of Grinding And Sharpening Metal Finishing Machines in Croatia
In value terms, grinding and sharpening machine production totaled $X in 2022 estimated in export price. Over the period under review, the total production indicated a remarkable increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The growth pace was the most rapid in 2018 with an increase of X% against the previous year. Over the period under review, production hit record highs at $X in 2020; however, from 2021 to 2022, production stood at a somewhat lower figure.
Exports of Grinding And Sharpening Metal Finishing Machines
Exports from Croatia
Grinding and sharpening machine exports from Croatia reduced sharply to X units in 2022, waning by X% against the previous year. Over the period under review, exports, however, posted significant growth. The pace of growth appeared the most rapid in 2015 with an increase of X%. The exports peaked at X units in 2021, and then fell significantly in the following year.
In value terms, grinding and sharpening machine exports expanded to $X in 2022. In general, exports, however, recorded strong growth. The growth pace was the most rapid in 2016 when exports increased by X%. Over the period under review, the exports attained the peak figure in 2022 and are likely to continue growth in the immediate term.
Exports by Country
Slovenia (X units) was the main destination for grinding and sharpening machine exports from Croatia, accounting for a X% share of total exports. Moreover, grinding and sharpening machine exports to Slovenia exceeded the volume sent to the second major destination, Bosnia and Herzegovina (X units), more than tenfold. Serbia (X units) ranked third in terms of total exports with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume to Slovenia totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Bosnia and Herzegovina (X% per year) and Serbia (X% per year).
In value terms, Slovenia ($X) emerged as the key foreign market for grinding and sharpening metal finishing machines exports from Croatia, comprising X% of total exports. The second position in the ranking was held by Bosnia and Herzegovina ($X), with a X% share of total exports. It was followed by Germany, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value to Slovenia amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Bosnia and Herzegovina (X% per year) and Germany (X% per year).
Export Prices by Country
In 2022, the average grinding and sharpening machine export price amounted to $X per unit, surging by X% against the previous year. In general, the export price, however, showed a abrupt contraction. The most prominent rate of growth was recorded in 2019 an increase of X%. The export price peaked at $X per unit in 2012; however, from 2013 to 2022, the export prices stood at a somewhat lower figure.
There were significant differences in the average prices for the major foreign markets. In 2022, amid the top suppliers, the country with the highest price was Germany ($X per unit), while the average price for exports to Slovenia ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Germany (X%), while the prices for the other major destinations experienced a decline.
Imports of Grinding And Sharpening Metal Finishing Machines
Imports into Croatia
In 2022, imports of grinding and sharpening metal finishing machines into Croatia skyrocketed to X units, with an increase of X% against the year before. Over the period under review, imports saw buoyant growth. The growth pace was the most rapid in 2018 when imports increased by X% against the previous year. Over the period under review, imports attained the peak figure at X units in 2019; however, from 2020 to 2022, imports failed to regain momentum.
In value terms, grinding and sharpening machine imports skyrocketed to $X in 2022. Overall, imports showed a resilient increase. The pace of growth was the most pronounced in 2013 when imports increased by X%. As a result, imports attained the peak of $X. From 2014 to 2022, the growth of imports failed to regain momentum.
Imports by Country
In 2022, Germany (X units) constituted the largest grinding and sharpening machine supplier to Croatia, accounting for a X% share of total imports. Moreover, grinding and sharpening machine imports from Germany exceeded the figures recorded by the second-largest supplier, China (X units), fivefold.
From 2012 to 2022, the average annual rate of growth in terms of volume from Germany amounted to X%.
In value terms, Germany ($X) constituted the largest supplier of grinding and sharpening metal finishing machines to Croatia, comprising X% of total imports. The second position in the ranking was held by China ($X), with a X% share of total imports.
From 2012 to 2022, the average annual rate of growth in terms of value from Germany amounted to X%.
Import Prices by Country
The average grinding and sharpening machine import price stood at $X per unit in 2022, with an increase of X% against the previous year. Over the period under review, the import price, however, showed a abrupt descent. The most prominent rate of growth was recorded in 2013 an increase of X%. As a result, import price reached the peak level of $X per unit. From 2014 to 2022, the average import prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Germany ($X per unit), while the price for China totaled $X per unit.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by China (X%).
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for grinding and sharpening machine in Croatia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28412305 - Numerically controlled flat-surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm
- Prodcom 28412315 - Numerically controlled cylindrical surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm
- Prodcom 28412325 - Other numerically controlled grinding machines in which the positioning in any one axis can be set up to accuracy > 0,01 mm
- Prodcom 28412335 - Non-numerically controlled flat-surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm
- Prodcom 28412345 - Non-numerically controlled cylindrical surface grinding machines for working metal, in which the positioning in any one axis can be set up to a minimum accuracy of 0,01 mm
- Prodcom 28412355 - Grinding machines for working metal, any one axis can be set to an accuracy . 0,01 mm excluding flat-surface grinding machines, cylindrical surface grinding machines
- Prodcom 28412365 - Numerically controlled sharpening (tool or cutter grinding) m achines for working metal
- Prodcom 28412375 - Non-numerically controlled sharpening (tool or cutter grinding) machines for working metal
Country coverage:
- Croatia
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Croatia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for grinding and sharpening machine in Asia.
This report provides an in-depth analysis of the market for grinding and sharpening machine in the U.S..
This report provides an in-depth analysis of the market for grinding and sharpening machine in China.
This report provides an in-depth analysis of the market for grinding and sharpening machine in the EU.
This report provides an in-depth analysis of the global market for grinding and sharpening machine.
- Price for Grinding and Sharpening Machine Croatia
- Grinding and Sharpening Machine Market
- Frozen and Fresh or Chilled Skipjack Tuna Market
- Frozen Market
- Frozen Scallops Market
- Jellyfish Market
- Non-Citrus Fruits not Elsewhere Classified Market
- Battered Fish Fillet Market
- Fluorine, Chlorine, Bromine and Iodine Market
- Crispbread Market