Czech Republic: Market for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids 2024

Market Size for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in the Czech Republic

In 2022, the Czech market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids decreased by X% to $X, falling for the third consecutive year after two years of growth. Over the period under review, consumption continues to indicate a mild slump. Consumption of peaked at $X in 2019; however, from 2020 to 2022, consumption failed to regain momentum.

Production of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in the Czech Republic

In value terms, production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids shrank slightly to $X in 2022 estimated in export price. Overall, production recorded a notable increase. The growth pace was the most rapid in 2017 when the production volume increased by X%. As a result, production attained the peak level of $X. From 2018 to 2022, production of growth remained at a somewhat lower figure.

Exports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Exports from the Czech Republic

Exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids from the Czech Republic reduced dramatically to X units in 2022, dropping by X% against the year before. Overall, exports, however, saw a relatively flat trend pattern. The pace of growth was the most pronounced in 2013 with an increase of X% against the previous year. The exports peaked at X units in 2015; however, from 2016 to 2022, the exports failed to regain momentum.

In value terms, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids expanded slightly to $X in 2022. The total export value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2017 when exports increased by X% against the previous year. The exports peaked in 2022 and are likely to continue growth in the near future.

Exports by Country

Slovakia (X units) was the main destination for exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids from the Czech Republic, accounting for a X% share of total exports. Moreover, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids to Slovakia exceeded the volume sent to the second major destination, Germany (X units), twofold. The third position in this ranking was held by Hungary (X units), with a X% share.

From 2012 to 2022, the average annual rate of growth in terms of volume to Slovakia totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Germany (X% per year) and Hungary (X% per year).

In value terms, Germany ($X), Belgium ($X) and Russia ($X) were the largest markets for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids exported from the Czech Republic worldwide, together comprising X% of total exports. The United States, Slovakia, Norway, France, Austria, Italy, the Netherlands, Poland, the UK and Hungary lagged somewhat behind, together accounting for a further X%.

The United States, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.

Export Prices by Country

The average export price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids stood at $X per unit in 2022, rising by X% against the previous year. Over the period under review, the export price saw measured growth. The most prominent rate of growth was recorded in 2018 an increase of X% against the previous year. Over the period under review, the average export prices hit record highs in 2022 and is expected to retain growth in years to come.

There were significant differences in the average prices for the major external markets. In 2022, amid the top suppliers, the country with the highest price was Russia ($X per unit), while the average price for exports to Hungary ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Germany (X%), while the prices for the other major destinations experienced more modest paces of growth.

Imports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Imports into the Czech Republic

In 2022, approx. X units of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids were imported into the Czech Republic; reducing by X% on 2021. Over the period under review, imports, however, recorded a relatively flat trend pattern. The most prominent rate of growth was recorded in 2019 with an increase of X% against the previous year. As a result, imports attained the peak of X units. From 2020 to 2022, the growth of imports of remained at a somewhat lower figure.

In value terms, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids stood at $X in 2022. Overall, total imports indicated a tangible expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2019 indices. The pace of growth was the most pronounced in 2021 when imports increased by X% against the previous year. Imports peaked in 2022 and are expected to retain growth in years to come.

Imports by Country

In 2022, China (X units) constituted the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids supplier to the Czech Republic, accounting for a X% share of total imports. Moreover, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids from China exceeded the figures recorded by the second-largest supplier, Germany (X units), threefold. Poland (X units) ranked third in terms of total imports with a X% share.

From 2012 to 2022, the average annual rate of growth in terms of volume from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and Poland (X% per year).

In value terms, Germany ($X), the UK ($X) and Austria ($X) appeared to be the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids suppliers to the Czech Republic, together comprising X% of total imports. China, Poland, Turkey and Croatia lagged somewhat behind, together comprising a further X%.

Poland, with a CAGR of X%, saw the highest growth rate of the value of imports, among the main suppliers over the period under review, while purchases for the other leaders experienced more modest paces of growth.

Import Prices by Country

In 2022, the average import price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids amounted to $X per unit, picking up by X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. The pace of growth was the most pronounced in 2013 an increase of X%. The import price peaked in 2022 and is likely to see gradual growth in years to come.

There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was the UK ($X per unit), while the price for Croatia ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Germany (X%), while the prices for the other major suppliers experienced more modest paces of growth.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :