Europe - Veneer Sheets and Sheets for Plywood and Other Wood Sawn Lengthwise - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEurope: Veneer Sheet Market 2024
Veneer Sheet Market Size in Europe
The Europe veneer sheet market shrank modestly to $X in 2022, reducing by X% against the previous year. The market value increased at an average annual rate of X% from 2012 to 2022; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, consumption reached the peak level of $X. From 2021 to 2022, the growth of the market remained at a somewhat lower figure.
Veneer Sheet Production in Europe
In value terms, veneer sheet production dropped slightly to $X in 2022 estimated in export price. In general, production continues to indicate a perceptible shrinkage. The pace of growth appeared the most rapid in 2021 with an increase of X% against the previous year. The level of production peaked at $X in 2012; however, from 2013 to 2022, production failed to regain momentum.
Veneer Sheet Exports
Exports in Europe
In 2022, approx. X square meters of veneer sheets and sheets for plywood and other wood sawn lengthwise were exported in Europe; declining by X% against the previous year's figure. Total exports indicated a resilient increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. As a result, the exports attained the peak of X square meters, and then fell in the following year.
In value terms, veneer sheet exports rose markedly to $X in 2022. Total exports indicated strong growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. The level of export peaked in 2022 and is expected to retain growth in the immediate term.
Exports by Country
Russia represented the main exporter of veneer sheets and sheets for plywood and other wood sawn lengthwise in Europe, with the volume of exports reaching X square meters, which was near X% of total exports in 2022. It was distantly followed by Ukraine (X square meters), Finland (X square meters), Lithuania (X square meters) and France (X square meters), together constituting a X% share of total exports. Estonia (X square meters), Latvia (X square meters), Romania (X square meters), Spain (X square meters), Germany (X square meters), the Netherlands (X square meters), Denmark (X square meters) and Sweden (X square meters) took a minor share of total exports.
Exports from Russia increased at an average annual rate of X% from 2012 to 2022. At the same time, Latvia (X%), Denmark (X%), Lithuania (X%), Finland (X%), the Netherlands (X%), Ukraine (X%), France (X%), Estonia (X%) and Sweden (X%) displayed positive paces of growth. Moreover, Latvia emerged as the fastest-growing exporter exported in Europe, with a CAGR of X% from 2012-2022. Spain and Romania experienced a relatively flat trend pattern. By contrast, Germany (X%) illustrated a downward trend over the same period. From 2012 to 2022, the share of Finland, Latvia, Lithuania, Russia, Ukraine and Denmark increased by X, X, X, X, X and X percentage points, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Ukraine ($X), Russia ($X) and Germany ($X) were the countries with the highest levels of exports in 2022, with a combined X% share of total exports. Romania, Spain, France, Estonia, Finland, Lithuania, Latvia, Sweden, the Netherlands and Denmark lagged somewhat behind, together accounting for a further X%.
Among the main exporting countries, Latvia, with a CAGR of X%, saw the highest rates of growth with regard to the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2022, the export price in Europe amounted to $X per square meter, increasing by X% against the previous year. Over the period under review, the export price, however, recorded a mild slump. Over the period under review, the export prices attained the maximum at $X per square meter in 2012; however, from 2013 to 2022, the export prices stood at a somewhat lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Germany ($X per square meter), while Russia ($X per square meter) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Romania (X%), while the other leaders experienced more modest paces of growth.
Veneer Sheet Imports
Imports in Europe
In 2022, after ten years of growth, there was significant decline in purchases abroad of veneer sheets and sheets for plywood and other wood sawn lengthwise, when their volume decreased by X% to X square meters. Total imports indicated a buoyant increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2012 indices. The growth pace was the most rapid in 2021 when imports increased by X%. As a result, imports reached the peak of X square meters, and then reduced in the following year.
In value terms, veneer sheet imports expanded rapidly to $X in 2022. Total imports indicated a strong expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 with an increase of X%. Over the period under review, imports reached the peak figure in 2022 and are likely to continue growth in the near future.
Imports by Country
Italy (X square meters), Latvia (X square meters), Spain (X square meters), France (X square meters), the Netherlands (X square meters), Poland (X square meters), Belgium (X square meters), Germany (X square meters), Estonia (X square meters) and Austria (X square meters) represented roughly X% of total imports in 2022. The following importers - Denmark (X square meters), Hungary (X square meters) and Lithuania (X square meters) - together made up X% of total imports.
From 2012 to 2022, the biggest increases were recorded for Estonia (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Italy ($X), Germany ($X) and Austria ($X) appeared to be the countries with the highest levels of imports in 2022, with a combined X% share of total imports. Spain, France, Poland, Belgium, the Netherlands, Lithuania, Hungary, Latvia, Estonia and Denmark lagged somewhat behind, together comprising a further X%.
In terms of the main importing countries, Estonia, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in Europe stood at $X per square meter in 2022, with an increase of X% against the previous year. Over the period under review, the import price, however, saw a relatively flat trend pattern. Over the period under review, import prices attained the maximum at $X per square meter in 2012; however, from 2013 to 2022, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Austria ($X per square meter), while Latvia ($X per square meter) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Latvia (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the veneer sheet market in Europe. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 16212113 - Veneer sheets, sheets for plywood and other wood sawn lengthwise, sliced/peeled, thickness . 6 mm and end-jointed, p laned/sanded/small boards for the manufacture of pencils
- Prodcom 16212118 - Coniferous and tropical wood veneer sheets and sheets for plywood, sawn lengthwise, sliced or peeled, of a thickness . 6 mm excluding end-jointed, planed or sanded
Country coverage:
- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Isle of Man
- Italy
- Latvia
- Liechtenstein
- Lithuania
- Luxembourg
- Malta
- Moldova
- Monaco
- Montenegro
- Netherlands
- North Macedonia
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Europe, split by region and country
- Trade (exports and imports) in Europe
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Albania
- Andorra
- Austria
- Belarus
- Belgium
- Bosnia and Herzegovina
- Bulgaria
- Croatia
- Czech Republic
- Denmark
- Estonia
- Faroe Islands
- Finland
- France
- Germany
- Gibraltar
- Greece
- Holy See
- Hungary
- Iceland
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- North Macedonia
- Malta
- Moldova
- Montenegro
- Netherlands
- Norway
- Poland
- Portugal
- Romania
- Russia
- San Marino
- Serbia
- Slovakia
- Slovenia
- Spain
- Sweden
- Switzerland
- Ukraine
- United Kingdom
- Liechtenstein
- Isle of Man
- Monaco
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the veneer sheet market in Asia.
This report provides an in-depth analysis of the veneer sheet market in the U.S..
This report provides an in-depth analysis of the veneer sheet market in China.
This report provides an in-depth analysis of the veneer sheet market in the EU.
This report provides an in-depth analysis of the global veneer sheet market.