Portugal - Injection or Compression Type Moulds for Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingPortugal: Compression Type Mould Market 2024
Compression Type Mould Market Size in Portugal
The Portuguese compression type mould market dropped sharply to $X in 2023, shrinking by X% against the previous year. Over the period under review, consumption recorded a abrupt descent. Over the period under review, the market attained the maximum level at $X in 2018; however, from 2019 to 2023, consumption failed to regain momentum.
Compression Type Mould Production in Portugal
In value terms, compression type mould production declined to $X in 2023 estimated in export price. Over the period under review, production, however, showed a relatively flat trend pattern. The most prominent rate of growth was recorded in 2018 when the production volume increased by X%. As a result, production attained the peak level of $X. From 2019 to 2023, production growth remained at a somewhat lower figure.
Compression Type Mould Exports
Exports from Portugal
In 2023, shipments abroad of injection or compression type moulds for rubber or plastics was finally on the rise to reach X units after four years of decline. The total export volume increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, the exports reached the peak and are likely to continue growth in the immediate term.
In value terms, compression type mould exports soared to $X in 2023. The total export value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The exports peaked at $X in 2018; however, from 2019 to 2023, the exports stood at a somewhat lower figure.
Exports by Country
Spain (X units), Germany (X units) and France (X units) were the main destinations of compression type mould exports from Portugal, together comprising X% of total exports. Romania, Poland, the Czech Republic, Slovakia, the UK, Belgium, Mexico, the United States, Italy and the Netherlands lagged somewhat behind, together comprising a further X%.
From 2012 to 2023, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Slovakia (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, Spain ($X), Germany ($X) and France ($X) constituted the largest markets for compression type mould exported from Portugal worldwide, with a combined X% share of total exports. Romania, Poland, the Czech Republic, the United States, Mexico, Slovakia, the UK, Belgium, Italy and the Netherlands lagged somewhat behind, together accounting for a further X%.
Romania, with a CAGR of X%, recorded the highest growth rate of the value of exports, in terms of the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
In 2023, the average compression type mould export price amounted to $X per unit, jumping by X% against the previous year. Overall, the export price, however, showed a relatively flat trend pattern. Over the period under review, the average export prices attained the peak figure at $X per unit in 2014; however, from 2015 to 2023, the export prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top suppliers, the country with the highest price was the United States ($X per unit), while the average price for exports to Belgium ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was recorded for supplies to Italy (X%), while the prices for the other major destinations experienced more modest paces of growth.
Compression Type Mould Imports
Imports into Portugal
In 2023, overseas purchases of injection or compression type moulds for rubber or plastics increased by X% to X units, rising for the second year in a row after three years of decline. Over the period under review, total imports indicated strong growth from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2021 indices. Over the period under review, imports reached the peak figure at X units in 2018; afterwards, it flattened through to 2023.
In value terms, compression type mould imports surged to $X in 2023. In general, total imports indicated a strong expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2021 indices. Over the period under review, imports attained the peak figure at $X in 2018; however, from 2019 to 2023, imports remained at a lower figure.
Imports by Country
In 2023, Spain (X units) constituted the largest compression type mould supplier to Portugal, accounting for a X% share of total imports. Moreover, compression type mould imports from Spain exceeded the figures recorded by the second-largest supplier, China (X units), twofold. The third position in this ranking was taken by France (X units), with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of volume from Spain amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and France (X% per year).
In value terms, Spain ($X) constituted the largest supplier of injection or compression type moulds for rubber or plastics to Portugal, comprising X% of total imports. The second position in the ranking was taken by Germany ($X), with a X% share of total imports. It was followed by China, with an X% share.
From 2012 to 2023, the average annual rate of growth in terms of value from Spain totaled X%. The remaining supplying countries recorded the following average annual rates of imports growth: Germany (X% per year) and China (X% per year).
Import Prices by Country
The average compression type mould import price stood at $X per unit in 2023, picking up by X% against the previous year. Overall, the import price, however, saw a mild setback. The pace of growth appeared the most rapid in 2013 when the average import price increased by X%. As a result, import price reached the peak level of $X per unit. From 2014 to 2023, the average import prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top importers, the country with the highest price was Germany ($X per unit), while the price for Austria ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the prices for the other major suppliers experienced a decline.
Source: IndexBox Platform
This report provides an in-depth analysis of the compression type mould market in Portugal. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25735070 - Injection or compression type moulds for rubber or plastics
Country coverage:
- Portugal
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Portugal
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the compression type mould market in Asia.
This report provides an in-depth analysis of the compression type mould market in the U.S..
This report provides an in-depth analysis of the compression type mould market in China.
This report provides an in-depth analysis of the compression type mould market in the EU.
This report provides an in-depth analysis of the global compression type mould market.