MERCOSUR - Interchangeable Tools for Hand Tools - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingMERCOSUR: Interchangeable Tool Market 2024
Interchangeable Tool Market Size in MERCOSUR
The MERCOSUR interchangeable tool market reduced to $X in 2022, waning by X% against the previous year. Over the period under review, consumption continues to indicate a relatively flat trend pattern. Over the period under review, the market hit record highs at $X in 2021, and then shrank in the following year.
Interchangeable Tool Production in MERCOSUR
In value terms, interchangeable tool production rose modestly to $X in 2022 estimated in export price. The total output value increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2013 when the production volume increased by X% against the previous year. Over the period under review, production reached the peak level at $X in 2020; afterwards, it flattened through to 2022.
Interchangeable Tool Exports
Exports in MERCOSUR
In 2022, approx. X tons of interchangeable tools for hand tools were exported in MERCOSUR; rising by X% compared with the year before. Total exports indicated a measured increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, exports increased by X% against 2020 indices. As a result, the exports attained the peak and are likely to continue growth in the immediate term.
In value terms, interchangeable tool exports soared to $X in 2022. In general, exports, however, showed a relatively flat trend pattern. Over the period under review, the exports attained the maximum at $X in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
Exports by Country
Brazil was the main exporting country with an export of about X tons, which amounted to X% of total exports. It was distantly followed by Chile (X tons), committing a X% share of total exports. The following exporters - Peru (X tons), Argentina (X tons) and Colombia (X tons) - together made up X% of total exports.
Brazil was also the fastest-growing in terms of the interchangeable tools for hand tools exports, with a CAGR of X% from 2012 to 2022. At the same time, Colombia (X%) and Chile (X%) displayed positive paces of growth. Peru experienced a relatively flat trend pattern. By contrast, Argentina (X%) illustrated a downward trend over the same period. While the share of Brazil (X p.p.) increased significantly in terms of the total exports from 2012-2022, the share of Argentina (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Brazil ($X) remains the largest interchangeable tool supplier in MERCOSUR, comprising X% of total exports. The second position in the ranking was taken by Chile ($X), with a X% share of total exports. It was followed by Peru, with a X% share.
From 2012 to 2022, the average annual growth rate of value in Brazil was relatively modest. The remaining exporting countries recorded the following average annual rates of exports growth: Chile (X% per year) and Peru (X% per year).
Export Prices by Country
In 2022, the export price in MERCOSUR amounted to $X per ton, with a decrease of X% against the previous year. Overall, the export price saw a noticeable slump. The pace of growth appeared the most rapid in 2020 when the export price increased by X%. The level of export peaked at $X per ton in 2014; however, from 2015 to 2022, the export prices remained at a lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Brazil ($X per ton), while Argentina ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Chile (X%), while the other leaders experienced a decline in the export price figures.
Interchangeable Tool Imports
Imports in MERCOSUR
Interchangeable tool imports reduced to X tons in 2022, falling by X% against the previous year's figure. Over the period under review, imports continue to indicate a slight slump. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. The volume of import peaked at X tons in 2012; however, from 2013 to 2022, imports stood at a somewhat lower figure.
In value terms, interchangeable tool imports shrank modestly to $X in 2022. In general, imports recorded a perceptible descent. The pace of growth was the most pronounced in 2021 with an increase of X%. Over the period under review, imports hit record highs at $X in 2012; however, from 2013 to 2022, imports stood at a somewhat lower figure.
Imports by Country
In 2022, Brazil (X tons) represented the key importer of interchangeable tools for hand tools, achieving X% of total imports. It was distantly followed by Chile (X tons), Argentina (X tons), Peru (X tons) and Colombia (X tons), together constituting a X% share of total imports. Ecuador (X tons) took a minor share of total imports.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the key importing countries, was attained by Chile (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Brazil ($X), Argentina ($X) and Chile ($X) constituted the countries with the highest levels of imports in 2022, with a combined X% share of total imports.
Argentina, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced mixed trends in the imports figures.
Import Prices by Country
The import price in MERCOSUR stood at $X per ton in 2022, with an increase of X% against the previous year. Over the period under review, the import price, however, continues to indicate a slight curtailment. Over the period under review, import prices attained the peak figure at $X per ton in 2013; however, from 2014 to 2022, import prices remained at a lower figure.
Average prices varied noticeably amongst the major importing countries. In 2022, major importing countries recorded the following prices: in Colombia ($X per ton) and Ecuador ($X per ton), while Chile ($X per ton) and Brazil ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Brazil (X%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the interchangeable tool market in MERCOSUR. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25734014 - Tapping tools for working metal
- Prodcom 25734016 - Threading tools for working metal
- Prodcom 25734019 - Tapping or threading tools (excluding work and tool holders for machines or hand tools, for working metal)
- Prodcom 25734023 - Drilling tools with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for rock drilling)
- Prodcom 25734025 - Masonry drills with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for rock drilling)
- Prodcom 25734027 - Drilling tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
- Prodcom 25734031 - Drilling tools with working part of high speed steel, for working metal excluding work and tool holders for machines or hand tools - for rock drilling
- Prodcom 25734033 - Drilling tools with working part of materials other than diamond, agglomerated diamond or sintered metal carbide, f or working metal excluding with working part of high speed steel
- Prodcom 25734035 - Drilling tools (excluding work and tool holders for machines or hand tools, with working part of diamond or agglomerated diamond, for rock drilling, masonry drills, for working metal)
- Prodcom 25734037 - Boring or broaching tools with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools, for earth boring)
- Prodcom 25734044 - Boring tools for working metal, with working part of materials other than diamond or agglomerated diamond
- Prodcom 25734045 - Boring or broaching tools (excluding work and tool holders for machines or hand tools, with diamond or agglomerated diamond working parts, for working metal, for earth boring)
- Prodcom 25734048 - Broaching tools for working metal, with working part of materials other than diamond or agglomerated diamond
- Prodcom 25734050 - Milling tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
- Prodcom 25734061 - Shank type milling tools for working metal (excluding with working part of sintered metal carbide)
- Prodcom 25734065 -
- Prodcom 25734067 -
- Prodcom 25734069 - Milling tools (excluding for working metal)
- Prodcom 25734071 - Turning tools with working part of sintered metal carbide, for working metal excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
- Prodcom 25734074 - Turning tools for working metal, with working part of materials other than cermets
- Prodcom 25734079 - Turning tools (excluding work and tool holders for machines or hand tools, for working metal)
- Prodcom 25734081 - Other interchangeable tools of CN .82.07 with working part of diamond
- Prodcom 25734083 - Screwdriver bits with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
- Prodcom 25734085 - Gear-cutting tools with working part of materials other than diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
- Prodcom 25734087 - Interchangeable hand tools with working part of sintered metal carbide excluding unmounted sintered metal carbide plates, sticks, tips and the like for tools
- Prodcom 25734089 - Interchangeable tools in other materials
- Prodcom 25736013 - Rock drilling or earth boring tools with working part of cermets
- Prodcom 25736018 - Rock-drilling or earth-boring tools, interchangeable, and parts therefor, with working parts of materials other than sintered metal carbide or cermets
- Prodcom 25736023 - Dies for drawing or extruding metal, with working part of diamond or agglomerated diamond (excluding work and tool holders for machines or hand tools)
- Prodcom 25736024 - Dies for drawing or extruding metal (excluding unmounted plates, sticks, tips, rods, pellets, rings, etc. of sintered metal carbides or cermets)
- Prodcom 25736033 - Pressing, stamping or punching tools for working metal (excluding work and tool holders for machines or hand tools)
- Prodcom 25736039 - Pressing, stamping or punching tools (excluding work and tool holders for machines or hand tools, for working metal)
Country coverage:
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in MERCOSUR, split by region and country
- Trade (exports and imports) in MERCOSUR
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Argentina
- Brazil
- Chile
- Colombia
- Ecuador
- Guyana
- Paraguay
- Peru
- Suriname
- Uruguay
- Venezuela
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the interchangeable tool market in Asia.
This report provides an in-depth analysis of the interchangeable tool market in the U.S..
This report provides an in-depth analysis of the interchangeable tool market in China.
This report provides an in-depth analysis of the interchangeable tool market in the EU.
This report provides an in-depth analysis of the global interchangeable tool market.