World - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingOverview of the Global Market for Rubber-to-Metal and Moulded Articles
Market Size for Rubber-to-Metal and Moulded Articles
The global rubber-to-metal and moulded article market stood at $X in 2023, with an increase of X% against the previous year. The market value increased at an average annual rate of X% from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. Over the period under review, the global market reached the maximum level at $X in 2019; however, from 2020 to 2023, consumption stood at a somewhat lower figure.
Production of Rubber-to-Metal and Moulded Articles
In value terms, rubber-to-metal and moulded article production amounted to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2018 when the production volume increased by X% against the previous year. Global production peaked at $X in 2019; however, from 2020 to 2023, production failed to regain momentum.
Exports of Rubber-to-Metal and Moulded Articles
Exports
In 2023, after two years of growth, there was decline in overseas shipments of rubber-to-metal and moulded articles, when their volume decreased by X% to X tons. The total export volume increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern remained consistent, with only minor fluctuations being recorded in certain years. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. Over the period under review, the global exports attained the peak figure at X tons in 2022, and then declined modestly in the following year.
In value terms, rubber-to-metal and moulded article exports rose sharply to $X in 2023. The total export value increased at an average annual rate of X% over the period from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The growth pace was the most rapid in 2021 when exports increased by X%. Over the period under review, the global exports hit record highs in 2023 and are likely to see steady growth in years to come.
Exports by Country
In 2023, China (X tons), distantly followed by Germany (X tons), Poland (X tons), Turkey (X tons) and Thailand (X tons) were the main exporters of rubber-to-metal and moulded articles, together constituting X% of total exports. The following exporters - the United States (X tons), Italy (X tons), Spain (X tons), India (X tons), Romania (X tons), the Czech Republic (X tons), Mexico (X tons) and Japan (X tons) - together made up X% of total exports.
From 2012 to 2023, the biggest increases were recorded for Mexico (with a CAGR of X%), while shipments for the other global leaders experienced more modest paces of growth.
In value terms, the largest rubber-to-metal and moulded article supplying countries worldwide were Germany ($X), China ($X) and the United States ($X), together accounting for X% of global exports. Poland, Italy, Turkey, Japan, Thailand, Spain, the Czech Republic, Romania, India and Mexico lagged somewhat behind, together accounting for a further X%.
Mexico, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, in terms of the main exporting countries over the period under review, while shipments for the other global leaders experienced more modest paces of growth.
Export Prices by Country
The average rubber-to-metal and moulded article export price stood at $X per ton in 2023, rising by X% against the previous year. Over the last eleven years, it increased at an average annual rate of X%. As a result, the export price attained the peak level and is likely to continue growth in the immediate term.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was the United States ($X per ton), while China ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the United States (X%), while the other global leaders experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports
In 2023, overseas purchases of rubber-to-metal and moulded articles decreased by X% to X tons for the first time since 2020, thus ending a two-year rising trend. The total import volume increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 when imports increased by X%. Over the period under review, global imports hit record highs at X tons in 2022, and then reduced in the following year.
In value terms, rubber-to-metal and moulded article imports amounted to $X in 2023. The total import value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth was the most pronounced in 2021 with an increase of X% against the previous year. Global imports peaked in 2023 and are expected to retain growth in the near future.
Imports by Country
In 2023, the United States (X tons), followed by Germany (X tons), Mexico (X tons) and Japan (X tons) represented the main importers of rubber-to-metal and moulded articles, together making up X% of total imports. China (X tons), France (X tons), Italy (X tons), the UK (X tons), Belgium (X tons), Russia (X tons), the Czech Republic (X tons), Poland (X tons) and Spain (X tons) took a relatively small share of total imports.
From 2012 to 2023, the biggest increases were recorded for the United States (with a CAGR of X%), while purchases for the other global leaders experienced more modest paces of growth.
In value terms, the largest rubber-to-metal and moulded article importing markets worldwide were the United States ($X), Germany ($X) and Mexico ($X), with a combined X% share of global imports. China, France, Italy, Japan, Poland, the UK, the Czech Republic, Spain, Belgium and Russia lagged somewhat behind, together accounting for a further X%.
Belgium, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, in terms of the main importing countries over the period under review, while purchases for the other global leaders experienced more modest paces of growth.
Import Prices by Country
In 2023, the average rubber-to-metal and moulded article import price amounted to $X per ton, increasing by X% against the previous year. In general, the import price, however, saw a relatively flat trend pattern. Over the period under review, average import prices attained the peak figure at $X per ton in 2014; however, from 2015 to 2023, import prices stood at a somewhat lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was France ($X per ton), while Russia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Spain (X%), while the other global leaders experienced more modest paces of growth.
Source: IndexBox Platform
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
Worldwide - the report contains statistical data for 200 countries and includes detailed profiles of the 50 largest consuming countries:
- USA
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
+ the largest producing countries
Data coverage:
- Global market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Global production, split by region and country
- Global trade (exports and imports)
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. GLOBAL PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. GLOBAL IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. GLOBAL EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- United States
- China
- Japan
- Germany
- United Kingdom
- France
- Brazil
- Italy
- Russian Federation
- India
- Canada
- Australia
- Republic of Korea
- Spain
- Mexico
- Indonesia
- Netherlands
- Turkey
- Saudi Arabia
- Switzerland
- Sweden
- Nigeria
- Poland
- Belgium
- Argentina
- Norway
- Austria
- Thailand
- United Arab Emirates
- Colombia
- Denmark
- South Africa
- Malaysia
- Israel
- Singapore
- Egypt
- Philippines
- Finland
- Chile
- Ireland
- Pakistan
- Greece
- Portugal
- Kazakhstan
- Algeria
- Czech Republic
- Qatar
- Peru
- Romania
- Vietnam
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.